Listening for engine communications on 49674
Closing down
Listening for engine communications on 49674
Closing down
Listening for engine communications on 49674
Traceback (most recent call last):
  File "Cura\util\sliceEngine.py", line 169, in submitInfoOnline
    f = urllib2.urlopen("https://stats.youmagine.com/curastats/slice", data = urllib.urlencode(data), timeout = 1)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 126, in urlopen
    return _opener.open(url, data, timeout)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 394, in open
    response = self._open(req, data)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 412, in _open
    '_open', req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 372, in _call_chain
    result = func(*args)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1207, in https_open
    return self.do_open(httplib.HTTPSConnection, req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1174, in do_open
    raise URLError(err)
URLError: <urlopen error [Errno 11004] getaddrinfo failed>
Traceback (most recent call last):
  File "Cura\util\sliceEngine.py", line 169, in submitInfoOnline
    f = urllib2.urlopen("https://stats.youmagine.com/curastats/slice", data = urllib.urlencode(data), timeout = 1)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 126, in urlopen
    return _opener.open(url, data, timeout)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 394, in open
    response = self._open(req, data)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 412, in _open
    '_open', req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 372, in _call_chain
    result = func(*args)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1207, in https_open
    return self.do_open(httplib.HTTPSConnection, req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1174, in do_open
    raise URLError(err)
URLError: <urlopen error [Errno 11004] getaddrinfo failed>
Closing down
Listening for engine communications on 49674
['changeZ', '50']
['changeZ', '0']
['changeZ', '0']
['changeZ', '0']
['changeZ', '0']
['changeZ', '1']
['changeZ', '1']
['changeZ', '1']
['changeZ', '1']
['changeZ', '1']
['changeZ', '2']
['changeZ', '2']
['changeZ', '2']
['changeZ', '50']
['changeZ', '0']
['changeZ', '0']
['changeZ', '0']
['changeZ', '0']
['changeZ', '50']
['changeZ', '0']
['changeZ', '0']
Closing down
Listening for engine communications on 49674
['changeZ', '50']
['changeZ', '0']
Closing down
Listening for engine communications on 49674
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Unknown M code:204
Traceback (most recent call last):
  File "Cura\util\sliceEngine.py", line 169, in submitInfoOnline
    f = urllib2.urlopen("https://stats.youmagine.com/curastats/slice", data = urllib.urlencode(data), timeout = 1)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 126, in urlopen
    return _opener.open(url, data, timeout)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 394, in open
    response = self._open(req, data)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 412, in _open
    '_open', req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 372, in _call_chain
    result = func(*args)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1207, in https_open
    return self.do_open(httplib.HTTPSConnection, req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1174, in do_open
    raise URLError(err)
URLError: <urlopen error [Errno 11004] getaddrinfo failed>
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=20 -s startCode=M190 S60.000000
M109 S195.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S1; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=30 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=20 -s startCode=M190 S60.000000
M109 S195.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S2; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=30 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.015s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=20 -s startCode=M190 S60.000000
M109 S195.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=30 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.015s
Slicing model...
Layer count: 948
Sliced model in 0.765s
Generating support map...
Generating layer parts...
Generated layer parts in 0.296s
Generated inset in 1.716s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=20 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=30 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.015s
Slicing model...
Layer count: 948
Sliced model in 0.780s
Generating support map...
Generating layer parts...
Generated layer parts in 0.297s
Generated inset in 1.731s
Generated up/down skin in 3.027s
Traceback (most recent call last):
  File "Cura\util\sliceEngine.py", line 169, in submitInfoOnline
    f = urllib2.urlopen("https://stats.youmagine.com/curastats/slice", data = urllib.urlencode(data), timeout = 1)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 126, in urlopen
    return _opener.open(url, data, timeout)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 394, in open
    response = self._open(req, data)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 412, in _open
    '_open', req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 372, in _call_chain
    result = func(*args)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1207, in https_open
    return self.do_open(httplib.HTTPSConnection, req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1174, in do_open
    raise URLError(err)
URLError: <urlopen error [Errno 11004] getaddrinfo failed>
Closing down
Listening for engine communications on 49674
Closing down
Listening for engine communications on 49674
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.046s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.796s
Generating support map...
Generating layer parts...
Generated layer parts in 0.327s
Generated inset in 2.403s
Generated up/down skin in 4.025s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.032s
Slicing model...
Layer count: 948
Sliced model in 0.795s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.607s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=0 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.031s
Slicing model...
Layer count: 948
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=0 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=0 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.032s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.015s
Slicing model...
Layer count: 948
Sliced model in 0.749s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.513s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=0 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.748s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=20 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.811s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.529s
Generated up/down skin in 2.730s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=20 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.780s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.606s
Generated up/down skin in 2.793s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=20 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.032s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.031s
Slicing model...
Layer count: 948
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s spiralizeMode=1 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.764s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.669s
Generated up/down skin in 0.063s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s spiralizeMode=1 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Traceback (most recent call last):
  File "Cura\util\sliceEngine.py", line 169, in submitInfoOnline
    f = urllib2.urlopen("https://stats.youmagine.com/curastats/slice", data = urllib.urlencode(data), timeout = 1)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 126, in urlopen
    return _opener.open(url, data, timeout)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 394, in open
    response = self._open(req, data)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 412, in _open
    '_open', req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 372, in _call_chain
    result = func(*args)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1207, in https_open
    return self.do_open(httplib.HTTPSConnection, req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1174, in do_open
    raise URLError(err)
URLError: <urlopen error [Errno 11004] getaddrinfo failed>
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s spiralizeMode=1 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=4 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=0 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.015s
Slicing model...
Layer count: 948
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s spiralizeMode=1 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=0 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=0 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.748s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.763s
Generated up/down skin in 0.062s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s spiralizeMode=1 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=4 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=0 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s spiralizeMode=1 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=4 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=4 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.032s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.015s
Slicing model...
Layer count: 948
Sliced model in 0.765s
Generating support map...
Generating layer parts...
Generated layer parts in 0.280s
Generated inset in 1.654s
Generated up/down skin in 0.062s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=4 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=4 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.764s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 1.685s
Generated up/down skin in 2.948s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=4 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=800 -s insetCount=1 -s downSkinCount=4 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.749s
Generating support map...
Generating layer parts...
Generated layer parts in 0.296s
Generated inset in 1.857s
Generated up/down skin in 3.166s
Closing down
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s raftAirGapLayer0=220 -s raftLineSpacing=3000 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s raftBaseLinewidth=1000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=4 -s initialLayerSpeed=20 -s raftSurfaceLayers=2 -s max_xy_jerk=20000 -s raftSurfaceLinewidth=400 -s raftInterfaceLinewidth=400 -s raftInterfaceThickness=270 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s raftAirGap=0 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s raftMargin=5000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s raftBaseThickness=300 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s raftSurfaceLineSpacing=400 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=0 -s startCode=M190 S60.000000
M109 S210.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s raftInterfaceLineSpacing=800 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=80 -s raftBaseSpeed=20 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s raftSurfaceSpeed=20 -s sparseInfillLineDistance=800 -s insetCount=1 -s downSkinCount=4 -s raftFanSpeed=0 -s multiVolumeOverlap=150 -s raftSurfaceThickness=270 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 16344 vertexes
Loaded from disk in 0.031s
Analyzing and optimizing model...
Face counts: 5448 -> 5378 98.7%
Vertex counts: 16344 -> 2689 16.5%
Size: 39.000000 38.980000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
vMin: -19.500000 -19.490000 0.000000
vMax: 19.500000 19.490000 189.796000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.016s
Slicing model...
Layer count: 948
Sliced model in 0.811s
Generating support map...
Generating layer parts...
Generated layer parts in 0.375s
Generated inset in 1.700s
Generated up/down skin in 2.933s
Failed to listen on port: 49674
Listening for engine communications on 49675
Closing down
Listening for engine communications on 49674
Closing down
Listening for engine communications on 49674
Closing down
Listening for engine communications on 49674
Closing down
Listening for engine communications on 49674
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 73320 vertexes
Loaded from disk in 0.219s
Analyzing and optimizing model...
Face counts: 24440 -> 24418 99.9%
Vertex counts: 73320 -> 12131 16.5%
Size: 80.816000 141.178000 25.000000
vMin: -40.408000 -70.589000 0.000000
vMax: 40.408000 70.589000 25.000000
vMin: -40.408000 -70.589000 0.000000
vMax: 40.408000 70.589000 25.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.109s
Slicing model...
Layer count: 125
Sliced model in 0.265s
Generating support map...
Generating layer parts...
Generated layer parts in 0.281s
Generated inset in 0.577s
Generated up/down skin in 3.198s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=39734 -s posy=-11415 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 38856 vertexes
Loaded from disk in 0.140s
Analyzing and optimizing model...
Face counts: 12952 -> 12932 99.8%
Vertex counts: 38856 -> 6424 16.5%
Size: 88.313000 71.862000 25.000000
vMin: -4.422000 -47.346000 0.000000
vMax: 83.891000 24.516000 25.000000
vMin: -4.422000 -47.347000 0.000000
vMax: 83.891000 24.515000 25.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.063s
Slicing model...
Layer count: 125
Sliced model in 0.140s
Generating support map...
Generating layer parts...
Generated layer parts in 0.203s
Generated inset in 0.296s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=50 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=39734 -s posy=-11415 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 38856 vertexes
Loaded from disk in 0.140s
Analyzing and optimizing model...
Face counts: 12952 -> 12932 99.8%
Vertex counts: 38856 -> 6424 16.5%
Size: 88.313000 71.862000 25.000000
vMin: -4.422000 -47.346000 0.000000
vMax: 83.891000 24.516000 25.000000
vMin: -4.422000 -47.347000 0.000000
vMax: 83.891000 24.515000 25.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 0.047s
Slicing model...
Layer count: 125
Sliced model in 0.141s
Generating support map...
Generating layer parts...
Generated layer parts in 0.234s
Generated inset in 0.358s
Closing down
Listening for engine communications on 49674
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=80 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=1333 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49674 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 1337046 vertexes
Loaded from disk in 2.871s
Analyzing and optimizing model...
Face counts: 445682 -> 444500 99.7%
Vertex counts: 1337046 -> 222250 16.6%
Size: 79.998000 149.998000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 1.700s
Slicing model...
Layer count: 700
Closing down
Failed to listen on port: 49674
Listening for engine communications on 49675
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=80 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49675 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 1337046 vertexes
Loaded from disk in 2.496s
Analyzing and optimizing model...
Face counts: 445682 -> 444500 99.7%
Vertex counts: 1337046 -> 222250 16.6%
Size: 79.998000 149.998000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 2.231s
Slicing model...
Layer count: 700
Sliced model in 45.537s
Generating support map...
Generating layer parts...
Generated layer parts in 2.387s
Generated inset in 11.169s
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=80 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49675 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 1337046 vertexes
Loaded from disk in 3.760s
Analyzing and optimizing model...
Face counts: 445682 -> 444500 99.7%
Vertex counts: 1337046 -> 222250 16.6%
Size: 79.998000 149.998000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 2.839s
Slicing model...
Layer count: 700
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=4500 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=80 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49675 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 1337046 vertexes
Loaded from disk in 3.213s
Analyzing and optimizing model...
Traceback (most recent call last):
  File "Cura\util\sliceEngine.py", line 169, in submitInfoOnline
    f = urllib2.urlopen("https://stats.youmagine.com/curastats/slice", data = urllib.urlencode(data), timeout = 1)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 126, in urlopen
    return _opener.open(url, data, timeout)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 394, in open
    response = self._open(req, data)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 412, in _open
    '_open', req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 372, in _call_chain
    result = func(*args)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1207, in https_open
    return self.do_open(httplib.HTTPSConnection, req)
  File "C:\Program Files (x86)\Cura_15.04.6\python\lib\urllib2.py", line 1174, in do_open
    raise URLError(err)
URLError: <urlopen error [Errno 11004] getaddrinfo failed>
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=20 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=300 -s supportAngle=60 -s fanFullOnLayerNr=1 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=7000 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=80 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49675 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 1337046 vertexes
Loaded from disk in 2.137s
Analyzing and optimizing model...
Face counts: 445682 -> 444500 99.7%
Vertex counts: 1337046 -> 222250 16.6%
Size: 79.998000 149.998000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 1.514s
Slicing model...
Layer count: 700
Running: C:\Program Files (x86)\Cura_15.04.6\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added before the T(n)
 -s supportXYDistance=700 -s insetXSpeed=60 -s retractionZHop=100 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.
;This code is added after the T(n)
 -s retractionSpeed=30 -s filamentFlow=100 -s max_acceleration[1]=9000000 -s infillOverlap=15 -s skinSpeed=15 -s inset0Speed=30 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=3 -s initialLayerSpeed=80 -s max_xy_jerk=20000 -s minimalLayerTime=5 -s infillSpeed=80 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s max_acceleration[3]=10000000 -s supportEverywhere=0 -s filamentDiameter=1750 -s initialLayerThickness=200 -s supportAngle=60 -s fanFullOnLayerNr=2 -s acceleration=3000000 -s extruderOffset[1].X=0 -s extruderOffset[1].Y=21600 -s layerThickness=200 -s endCode=M190 S0
M104 S0 ; turn off extrudeur temperature
G28 X0  ; home X axis
 -s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=2000 -s objectSink=0 -s retractionAmount=7000 -s nozzleSize=400 -s skirtLineCount=10 -s startCode=M190 S60.000000
M109 S200.000000
G28
G1 Z50 F5000 ; lift nozzle quand le lit est chaud il descend à 50mm du bed
M109 S210; chauufe la buse à 210)oour le pla, programmation  210° sur la buse, et attente que cette température soit atteinte avant de passer à la ligne suivante.
S0
 -s max_acceleration[0]=9000000 -s skirtDistance=0 -s max_acceleration[2]=100000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s perimeterBeforeInfill=1 -s printSpeed=80 -s fixHorrible=0 -s layer0extrusionWidth=400 -s moveSpeed=80 -s max_z_jerk=400 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s max_e_jerk=5000 -s sparseInfillLineDistance=2000 -s insetCount=1 -s downSkinCount=3 -s multiVolumeOverlap=150 -g 49675 -s posx=0 -s posy=0 $
Cura_SteamEngine version 15.04.6
Copyright (C) 2014 David Braam

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
Default config 'default.cfg' not used
Reading mesh from socket with 1337046 vertexes
Loaded from disk in 2.153s
Analyzing and optimizing model...
Face counts: 445682 -> 444500 99.7%
Vertex counts: 1337046 -> 222250 16.6%
Size: 79.998000 149.998000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
vMin: -39.999000 -74.999000 0.000000
vMax: 39.999000 74.999000 140.000000
Matrix: 1.000000 0.000000 0.000000
Matrix: 0.000000 1.000000 0.000000
Matrix: 0.000000 0.000000 1.000000
Optimize model 1.528s
Slicing model...
Layer count: 700
Sliced model in 39.781s
Generating support map...
Generating layer parts...
Generated layer parts in 2.137s
Generated inset in 8.315s
Generated up/down skin in 14.367s
Closing down
